How to install mesh to special shap frame
Time:2017-07-26
Views:923
1. Center and tension mesh with ties. Make all cutoff points along and parallel to the skew side, and cut.
2.Use the battery-powered sqaging tool to swage the mesh eye ends onto the loose ends of the wire rope.
3. Thread perimeter rope on the other side of the frame as described in step 3, The ends of both perimeter ropes must be threaded through the last sleeve and then pulled tight. Now all cable ties can be removed.
4.Swage the sleeves with the mesh swaging tool, and cut off loose ends of the perimeter rope.
2.Use the battery-powered sqaging tool to swage the mesh eye ends onto the loose ends of the wire rope.
3. Thread perimeter rope on the other side of the frame as described in step 3, The ends of both perimeter ropes must be threaded through the last sleeve and then pulled tight. Now all cable ties can be removed.
4.Swage the sleeves with the mesh swaging tool, and cut off loose ends of the perimeter rope.
ChatNow
Email
ChatNow